This Kinetik Project has a traditional mid-section and extra pliable ends for more of a locked in feel on presses and rebounding out of them. With cable boards you want leverage points where a certain part of the board compresses until the fulcrum kicks in with snap back. This series does that by allowing a rider to exaggerate their press with the softest flex numbers in the tip/tail – but as the press gains a high degree of angle, the center of the board prevents it from folding over. A design with less rocker for infinite top water speed, reduced drag, and more overall contact with the deepest G&R channels of any of our cable boards for extra traction. The cable kingpin design was created for an exaggerated technical nose/tail press with added snap back compared to a Utopia counterpart.
| Size
(CM) |
Height
(Inches) |
Stance
(Inches) |
Center
(Inches) |
Surface
(Sq Inches) |
Weight
(LBS Range) |
|---|---|---|---|---|---|
| 147 | 3.1 | 21-27 | 17.2 | 897 | 140-190 |
| 152 | 3.2 | 21-27 | 17.3 | 928 | 170+ |








